Lichen on Render: What It Is, Whether to Remove It and How

Lichen on render is a living growth that settles on a wall that stays damp, and it rarely clears up on its own. The right fix has two parts: remove the growth gently, without roughening the render, and find out why the wall is staying wet. If you are in Cornwall or the South West and want it done properly, our exterior home cleaning service deals with the growth, and our painters can refinish the wall once it is clean and dry.
This guide explains what you are looking at, what happens if you leave it, how a careful clean is carried out and what keeps the wall clean afterwards.
TL;DR
Lichen, algae, moss and mould all appear on render that stays wet for long periods. Blocked downpipes and leaking gutters are frequent causes.
Lichen is the stubborn one: crusty, leathery patches in orange, green, grey or black that cling to the surface.
Leaving it can trap water in the render and, in freezing weather, add to frost damage. Cleaning it off is usually the right move for a modern rendered home.
Aggressive pressure washing roughens and damages render. Low pressure and a suitable treatment are the careful route.
Without fixing the damp source, the growth comes back. Cleaning, repairs and repainting work best as one plan.
Table of Contents
What lichen on render actually is
Lichen is not a stain in the way dirt is. It is a living organism, a partnership between a fungus and an alga, and it grows on the face of your wall. The Concrete Society, a professional body for concrete and cementitious materials, explains that biological deposits on render run from green to brown or black and come from algae, fungi, lichens and mosses. They form only when the render is wet for significant periods, frequently because of blocked downpipes or leaking gutters.
So the growth tells you something about the wall. Somewhere, water is lingering. That may be a gutter overflowing down one corner, a shaded side that never dries or a border of plants pressed against the wall.
A surveying reference notes that in the UK, conditions are generally more favourable on wetter northern aspects, though lichens often flourish on south-facing surfaces too. The same sheet says lichen populations have gradually increased in urban areas since air quality improved under the Clean Air Act. In other words, a sunny, clean-air street in Truro or Plymouth is no guarantee against it.

Lichen, algae, mould or moss: how to tell them apart
The treatment is broadly similar, but knowing what you have helps you judge how long it has been there and how stubborn it will be. The same surveying reference describes each:
Growth | What it looks like on render |
Lichen | Leathery crust on the surface or embedded in it, usually orange, green, grey or black |
Algae | Green, red or brown powdery deposits or filaments, slimy when wet |
Mould | Grey, green, brown or black spots or patches that can spread into a furry layer |
Moss | Green cushions of spiky tufts, which may look brown when dry |
That description comes from the InspectaPedia sheet on algae, lichen and mould. On a painted or textured finish, a few easy clues help. Algae smear and look like a green or black film, often streaking down from a gutter. Lichen sits in rounded, raised patches that you can feel with a fingertip. Moss gathers in ledges, cracks and the tops of walls.
If you are unsure, it does not matter much. A surveyor or a good exterior cleaner will identify it at the first visit. We cover the more common green film in our guide to exterior algae removal, and the cement-based finish in our piece on K Rend cleaning.
Should you leave it or remove it?
There are two sides to this, and honesty helps. Historic England says organic growths can contribute to the natural aged patina of old masonry, while moss sustains moisture that can damage it and some lichen and bacteria actively cause deterioration. That advice is aimed at historic stone and brick.
For a typical rendered house, the picture is more practical. The Concrete Society notes that lichen growths may obscure mouldings and trap water, which can lead to damage through freeze-thaw cycles, and that some acidic by-products of lichens can erode certain substrates. A surveying reference adds that these growths on external surfaces often disfigure and deteriorate the finish but are unlikely to cause major structural damage.
For most homeowners, that adds up to a few clear reasons to act:
The wall looks tired and the render can look older than it is.
Trapped moisture on the face of the render is something you want to keep down going into winter.
Paint applied over living growth will not bond well, and the growth shows through again.
The growth is an early warning of a leak or poor drainage, which is cheaper to deal with early.
A note for listed buildings and conservation areas
If your home is listed, in a conservation area or part of a protected structure, check before anything is cleaned. Historic Environment Scotland says some lichen and moss species are considered endangered and may be protected by law, and that consent is normally required for stonecleaning listed buildings, scheduled monuments and structures in conservation areas. That guidance covers Scotland. In Cornwall and the rest of England, ask your local planning authority what applies to your property before you book any cleaning.
Why pressure washing is the wrong tool for render
The most common mistake is to hire a jet wash and blast the wall. Render is a thin, relatively soft cement or lime-based coat, and it does not take well to that treatment. Historic England’s research states that conventional water cleaning causes some loss of surface, and that overzealous cleaning with high-pressure jets can roughen the surface and cause significant damage. Frequent cleaning threatens the durability of the material itself.
A roughened surface is also a more welcoming surface. It holds water and dirt, so growth returns faster. If you have already been quoted for a hard blast, our guide to contractor rules for avoiding pressure washing render damage sets out what a careful contractor does instead.
The same logic applies to other exterior materials. If you have UPVC fascias or cladding as well as render, you will find general advice on cleaning vinyl siding without damaging it, and the principle of gentle methods over force carries across.
How lichen is removed from render safely
This is the sequence the professional guidance points to. It also shows how much there is to get right, and why most householders prefer to hand it to an exterior cleaning contractor.
1. Check where the water is coming from
The Concrete Society’s first step is to check for rainwater leakage from pipes or gutters. If the growth runs in a streak from one joint or in one corner, that is the clue. Cleaning a wall that a broken gutter is still soaking is wasted money. Our exterior home cleaning service includes gutter cleaning, so overflowing guttering can be dealt with in the same visit as the wall.
2. Loosen thick growth gently
For thick lichen, the Concrete Society says growth should be partly removed or torn with a stiff brush before treatment. The aim is to break the crust so the treatment reaches the living part. This is hand work and needs a light touch, as hard scrubbing can scar the render.

3. Apply a suitable treatment and give it time
A surface biocide, a product that kills living growth, is brushed well into the surface, preferably during a dry spell so rain does not wash it out before it acts. The InspectaPedia sheet notes biocides can take a few days to become effective. That is why a wall can look much the same straight after treatment and then clear over the following days or weeks.
There is one trick worth knowing. Lichen that has dried out for a long time resists water. The Concrete Society advises lightly moistening dry lichen first so it rehydrates and takes up the biocide. A contractor who understands this gets better results than someone who simply sprays and leaves.
4. Choose products with care
Products are not all equal. Historic England says commonly used algicides based on quaternary ammonium compounds have been shown to be harmful to the environment and wildlife, and that their use is becoming more restricted. Plants, ponds, drains and neighbouring property all need protecting during the work. Householders using any biocide themselves should only choose one made for general public use and follow its label, including any rules about protective equipment and distance from ponds and watercourses.
Never mix cleaning chemicals. Bleach combined with acids is a particular hazard because it gives off chlorine gas.
5. Leave the surface to dry, then inspect
Once the render is fully dry, look for hairline cracks, failed pointing and blown (hollow-sounding) patches. These let water in and are where growth restarts. Repairs should be done before any paint goes on. Our guide on painting over mould on walls explains why the surface must be properly prepared first, and the step by step exterior cleaning guide shows the order of work.
What the work involves, and what it takes off your hands
Done properly, removing lichen from render is a chain of decisions: which treatment suits your finish, how much pressure is safe, what the weather will do, where the runoff goes and what to protect. Getting any one wrong can leave streaks, a damaged surface or a patch that regrows within months. Historic Environment Scotland points out that re-establishment can occur within months when the underlying conditions are not changed.
For a homeowner or landlord, the benefit of using a contractor is a clean wall without the ladder work, the chemical choices or the risk to your render. Our exterior home cleaning covers pressure washing, gutter cleaning and window cleaning, and we work on homes and commercial properties across Cornwall and the South West.
Stopping lichen coming back
No treatment is permanent if the wall stays wet. Prevention comes down to controlling moisture:
Keep gutters and downpipes clear and in good repair.
Cut back plants and trees that shade the wall and keep it damp.
Keep soil and paving below the damp proof course, the barrier near the base of the wall that stops damp rising.
Keep air bricks clear.
Repair cracked render and failed pointing.
Those points are drawn from guidance on mould, algae and lichen on outside walls. The Building Conservation Directory makes the same point from a professional angle: the key lies in planned preventive maintenance, especially rainwater disposal systems and trimming plant growth.
North-facing and tree-shaded walls will always need more attention than a sunny elevation, so it is sensible to check them first each year. Efflorescence, the white salty bloom that sometimes appears on walls, is another sign of moisture, and our piece on diagnosing moisture first covers it.
Cleaning, then repainting the render
Where the render has faded or the old paint is flaking, cleaning is the first step and a fresh coat is the second. A clean, sound, fully dry surface gives a coating something to grip. Our exterior home painting work covers rendered walls, and our airless spraying is one of our specialist techniques for applying coatings across larger surfaces. If you are weighing up the finish, the questions in our guide to spraying exterior walls in the UK are worth reading first, and our guide to exterior paint brands helps you compare.
Get your render cleaned by A Brush With Gus
A Brush With Gus is a family-run painting and decorating business led by brothers Gus and Rhys, working in Cornwall and the South West. We handle exterior home cleaning and exterior painting for homeowners, landlords and commercial property owners, so the clean and the repaint can be planned together rather than hired separately.

To discuss your render, see our exterior home cleaning page or get in touch through our website for a quotation.
Our view on lichen and render
We see lichen on render as a message from the wall. It is telling you that water is sitting somewhere it should not be, and the best result comes from listening to that message rather than just cleaning over it. Our approach is to treat cleaning and painting as one job. A wall that is cleaned gently, checked for cracks and drainage faults, allowed to dry and then properly coated stays looking good for longer than one that has simply been blasted. That is why we put long-lasting results ahead of speed. As a family business, we would rather explain what is happening on your wall and give a clear quotation than leave you guessing. Our spraying and exterior painting work gives us a close view of how finishes age, and we bring that to every cleaning job. Angus
FAQ
What kills lichen on render?
A surface biocide brushed well into the growth, ideally in a dry spell, is the approach set out by the Concrete Society. Thick patches are loosened with a stiff brush first, and very dry lichen is lightly moistened so it absorbs the treatment. Because biocides can take a few days to work, results appear gradually.
Can I pressure wash lichen off render?
It is not advisable. Historic England warns that high-pressure jets can roughen the surface and cause significant damage, and that frequent cleaning threatens the material’s durability. A low-pressure approach with a suitable treatment is the safer route, which is how a careful contractor works.
Is lichen on render harmful to the house?
Usually it is more a cosmetic and moisture issue than a structural one. Lichen can trap water against the surface, which may contribute to frost damage, and it signals leaking gutters or poor drainage that deserve attention. Dealing with it early keeps the render sound and ready for repainting.
How long before lichen grows back?
That depends on whether the wall still gets wet. Historic Environment Scotland notes re-establishment can occur within months where conditions remain unchanged. Fixing gutters, trimming plants and repairing cracks give the clean the best chance of lasting.
Can you paint over lichen on render?
No. Paint needs a clean, dry and sound surface, and living growth underneath will break the bond and show through. Clean the wall, let it dry, repair any defects and then repaint. Our team can plan the cleaning and painting together.
Sources
Recommended

Comments