top of page
Brothers of the brush

07488 303368

uPVC Spraying Benefits: Why Respray Instead of Replace

WM Creative Designs Limited
1 day ago
8 min read

Decorator spraying a masked uPVC window frame

The main benefit of uPVC spraying is that it gives faded, yellowed or dated frames a new colour and a protective finish for a fraction of the cost of replacing them. The Paint Spraying Association, the UK trade body for the sector, says spraying typically costs 20–30% of the price of new windows. A professional finish can last 10–15 years or more, depending on conditions and upkeep. If your frames are sound but look tired, spraying is usually the sensible first thing to price. Our uPVC spraying service covers windows, doors and more across Cornwall and the South West.



TL;DR

 

  • Spraying changes the colour of sound uPVC frames, doors and conservatories without the mess, lead time or cost of replacement.

  • Typical cost is 20–30% of the price of new windows, according to the Paint Spraying Association.

  • A professionally applied finish can last 10–15 years or more, and gives a protective layer against rain, UV and temperature swings.

  • A fresh colour lifts kerb appeal, and a good result depends on thorough cleaning, preparation and the right weather.

  • Frames that are cracked, warped or failing in function are a replacement job, not a spraying job.

 

Table of Contents

 

 

What uPVC spraying actually is

 

uPVC is the rigid plastic used in most UK double-glazed window frames, doors, fascias and conservatories. Spraying means cleaning and preparing the surface, then applying a paint made for plastic with professional spray equipment, so the coating bonds to the frame and cures to an even, brush-mark-free finish.

 

It is not the same as brushing masonry paint onto a window. Plastic is slick and flexes with heat, so the preparation and the coating both matter. If you want the process explained from the start, our homeowner’s guide to uPVC spraying walks through it.

 

Benefit 1: a different colour without replacing anything

 

Most uPVC in older homes is white, and white ages badly. Frames can pick up a yellow or grey cast over the years, and brown or woodgrain frames from earlier decades can look out of step with the rest of the house. Spraying lets you keep the frames you have and change the look completely.

 

The most requested change is a move to a dark, modern shade such as anthracite grey, but the colour range is wide. Kolorbond, a UK paint manufacturer, says its uPVC paint is available in almost any colour in gloss, satin or matt, so you can match a front door to a new render colour or tie the windows into the rest of the exterior.

 

A few practical points on colour:

 

  • Sheen matters. Gloss reflects light and shows imperfections more. Satin and matt look softer on older frames.

  • Look at the whole house. Frames, front door, fascias, gutters and garage door usually read as one scheme, so it helps to decide them together.

  • Dark colours on south-facing frames. Dark shades take up more heat, which is one reason a quality finish and proper preparation matter on sunny elevations.

 

If you want ideas for how window and door colours work with interiors and the wider look of a home, this doors and windows inspiration page is a good place to browse before you choose.

 

Benefit 2: it costs a fraction of replacement

 

Replacement means new frames, fitting, making good around the openings, and often weeks between ordering and installation. The Paint Spraying Association puts spraying at around 20–30% of the cost of new windows. On a whole house, that gap is usually the deciding factor.


Spraying costs around twenty to thirty percent of replacement

The saving is greatest when the frames themselves are in good condition. The glazing units, seals, hinges and locks may all be working perfectly. Replacing them to get a new colour means paying for parts you did not need to change.

 

Worked example

 

Imagine a three-bedroom semi with seven windows, a front door and a back door. A replacement quote for that whole set will be a major home-improvement spend. At 20–30% of that figure, spraying brings the same colour change into the range of a routine maintenance budget. The exact figure depends on the number of frames, their condition and access, so a written quote after a look at the property is the only reliable number. We do not publish a fixed price list, because every house is different.

 

For a sense of what quotes should cover on a single item, our guide to front door painting costs explains what to check in a quote.

 

Benefit 3: less disruption

 

Replacing windows means removing old frames, sometimes disturbing plaster and decoration indoors, and living with openings for a period. Spraying is done on the existing frames, normally from outside, with the surrounding glass, seals and handles masked off.

 

For landlords and property managers this is a real advantage. A house can often stay occupied, there are no new frames to wait for, and the work is finished in a short window rather than across several visits. For commercial owners, shopfronts and office frames can be refreshed with little interruption to the day.

 

Benefit 4: a protective finish

 

A sprayed finish is more than cosmetic. According to the Paint Spraying Association, quality uPVC spray paints are UV-resistant and weatherproof, giving a protective layer against rain, UV rays and temperature fluctuations. Kolorbond describes its PVCu paint as UV-resistant and very colour stable.

 

That matters because uPVC left untreated in strong sunlight and wet weather tends to discolour. Our article on why uPVC frames yellow and how to fix it covers the causes. Spraying deals with the existing discolouration and puts a coating between the plastic and the weather.


Benefit 4: a protective finish

Benefit 5: a long-lasting result

 

The same Paint Spraying Association FAQ says a professionally sprayed finish can last 10–15 years or more, depending on environmental conditions and maintenance. Coastal exposure, south-facing elevations and neglected cleaning all play a part. Kolorbond guarantees its PVCu paint for up to 10 years.

 

Upkeep is simple. Wash the frames with mild soap and water once or twice a year and avoid abrasive cleaners or scouring pads. Our uPVC spray lifespan guide sets out what affects durability in South West conditions.

 

Benefit 6: better kerb appeal and a stronger first impression

 

Frames and doors take up a large share of what you see from the street. The Paint Spraying Association notes that a sprayed finish can improve kerb appeal, which is a positive factor in property value, though it adds less than full replacement would. For homeowners preparing to sell or let, a crisp, consistent colour is one of the cheaper ways to make a house look cared for.

 

Street-facing windows also shape how a room feels from outside, which is worth thinking about when you pick a colour. If you are coordinating the inside with the outside, these notes on curtains for street-facing windows help with the interior side.

 

Benefit 7: it suits more than windows

 

Spraying is not limited to window frames. The same approach is used on:

 

 

Because the finish goes on with airless and similar spraying equipment, large flat or repetitive areas come out smooth and consistent. That is also why the technique suits commercial premises and larger properties.

 

Spraying or replacing: which is right for your frames?

 

Situation

Spraying

Replacement

Frames sound, colour dated or yellowed

Best fit

Not needed

Want a dark or bold colour

Best fit

Costly, depends on factory options

Tight budget

Best fit

Much higher cost

Occupied home or open business

Short, mostly external job

More disruption

Seals failed, misting between glass

Does not fix the glazing

Needed

Cracked, warped or damaged frames

Not suitable

Needed

If the frames work properly and the problem is how they look, spraying answers it. Spraying cannot repair failed double glazing units or structural damage, so the first step is a proper look at the condition of each frame.

 

How to get the best result

 

The benefits above only appear when the job is done well. These are the points that decide it:

 

  1. Cleaning. Dirt, algae, grease and chalky oxidised plastic must come off first. Our exterior home cleaning service can wash frames and the surrounding walls, gutters and windows before spraying.

  2. Preparation. The surface is keyed so the paint grips. Skipping this is the most common cause of peeling.

  3. Masking. Glass, seals, hinges and handles are protected so the finish is clean at every edge.

  4. The right coating. Use a paint made for uPVC, applied in thin, even coats.

  5. The right weather. Cold, damp or windy conditions affect how paint cures. Our note on the 10°C limit for spraying uPVC in winter explains why timing matters, which is why spring to early autumn is the usual season.

  6. Aftercare. Leave the finish to cure and then wash gently when needed.

 

The colour question is worth settling early. Our guide to anthracite grey uPVC spraying is a good starting point for the most popular choice, and the essential guide to uPVC respraying covers the process end to end.

 

Who benefits most

 

  • Homeowners with sound but tired frames who want a modern colour without the cost of new windows.

  • Landlords and property managers who need several properties to look consistent and want short, low-disruption work.

  • Commercial owners with shopfronts, offices or units whose frames let down the building.

  • Anyone planning wider exterior work. Frames, render, fascias and doors can be handled together so the whole house looks planned.

 

Our view on spraying uPVC

 

We are a family business run by brothers Gus and Rhys, and uPVC spraying is one of the jobs we do most for homeowners across Cornwall and the South West.   Our view is simple. If the frames are structurally sound, replacing them to change the colour is spending money on parts that already work. Spraying uses the frames you have, keeps the disruption low and gives you a colour you actually chose.   What makes the difference is the work you cannot see once it is finished: cleaning, preparation and applying the coating in the right conditions. That is where we put our time, because a good finish is built on it. Advanced spraying techniques, airless spraying included, are a specialism of ours, and we aim for results that last.   If you are weighing up spraying against replacement, talk to us about your frames and we will tell you straight which suits your house.   Angus

 

Get your frames sprayed

 

We spray uPVC windows, doors and related surfaces for homes and commercial properties in Cornwall and the South West, and we can pair it with exterior cleaning and exterior painting so the whole property is finished together. Tell us what you have, send a few photos if you like, and we will talk through your options.


Abrushwithgus

See our uPVC spraying page or get in touch via our home page to ask for a quotation.

 

FAQ

 

How long does sprayed uPVC last?

 

The Paint Spraying Association says a professionally sprayed finish can last 10–15 years or more, depending on conditions and maintenance. Regular washing with mild soap helps preserve it. Exposure to strong sun and coastal weather influences the figure.

 

Is spraying cheaper than replacing uPVC windows?

 

Yes. The Paint Spraying Association says spraying typically costs 20–30% of the price of new windows. The final figure depends on how many frames you have and their condition, so a quotation after an inspection is the way to get an exact number.

 

Can I spray any uPVC frame?

 

Sound frames that are clean and structurally intact are good candidates. Windows, doors, conservatories, fascias and garage doors are all commonly sprayed. Frames that are cracked, warped or have failed glazing units need replacement rather than a new finish.

 

Does spraying add value to a property?

 

A fresh colour improves kerb appeal, which the Paint Spraying Association describes as a positive factor in property value. It will not add as much as full replacement, but it costs far less to achieve.

 

When is the best time of year to spray uPVC?

 

Mild, dry weather gives the best cure, so spring to early autumn is the usual window. Cold conditions can stop the paint from curing properly, which is why we explain the temperature limit in our winter spraying guide.

 

Sources

 

Recommended

 

 
 
 

Recent Posts

See All

Comments


bottom of page